If aspiration is slow, perform a deep clean or run a cleaning solution through the tubing.
Proper installation is critical for the accuracy of your results. According to the , the device should be placed on a flat, stable surface away from direct sunlight and extreme temperatures.
Make sure to mention that while the manual is comprehensive, users might need additional training beyond the manual. Also, maybe a note that the manual is essential for proper operation of the biosystems device. biosystems bts 350 user manual
The analyzer supports up to three levels of QC to ensure validated, reliable results.
Turn on the instrument and allow the LED source to stabilize (usually 1–2 minutes). If aspiration is slow, perform a deep clean
Potential drawbacks might include if the manual is too technical, lacks clear examples, or if there's a language barrier since the user manual is in English. Also, if there are missing steps or vague instructions that could confuse the user, that’s a negative point.
Toggle the main power switch located at the rear of the unit. Make sure to mention that while the manual
: Select "Concentration," choose your programmed test (e.g., Glucose, Albumin), and follow the on-screen prompts to insert a baseline (blank) followed by your sample. Key Technical Features Optical System
The user manual provides detailed steps for proper installation. Following these is critical for accurate performance and safety.
Switch on the power button located on the back or side panel.
Allow 10 cm of clearance around the cooling fans. Power Requirements