Digi Sm500 Scale User Manual ((top)) -

Press the key twice or until the display reads S MODE (Service/Program Mode). Press the PLU key to enter the item maintenance menu. Creating a New PLU Type the desired PLU number (e.g., 101 ) and press PLU .

Push the green release lever back up firmly until it clicks to lock the print head into position. Press the key to align the labels correctly. 7. Troubleshooting and Error Codes Error Code / Symptom Possible Cause Corrective Action Scale won't zero

Heavier, uniform pieces give better accuracy. Minimum recommended sample size: 10.

The standard barcode structure used by point-of-sale (POS) scanners for weighed items is the EAN-13 or UPC-A format. This embeds the PLU number and the calculated total price. To change barcode settings in P-Mode: Navigate to the (usually P03 ). digi sm500 scale user manual

If you delete all of your shared links, no one can see the content inside them anymore. If you delete a link, you'll still have access to the thread in your AI Mode history. Learn more Can't delete the links right now. Try again later. You don't have any shared links yet.

Rotate the adjustable rubber feet until the air bubble rests perfectly in the center of the red circle. Loading Label or Receipt Roll Open the printer side door.

Clean the thermal print head with an alcohol swab. Increase print density in user setups. 8. Cleaning and Maintenance Press the key twice or until the display

: Advanced fields allow for ingredients, storage instructions (e.g., "Store at 4°C"), and country of origin labels. 3. Maintenance and Diagnostics

Calibration is a critical step to ensure accurate weight measurements. The Digi SM500 scale user manual provides detailed instructions for calibration. Here's a step-by-step guide:

: Used for entering PLU data, shop names, and label formats. Reading (X) Mode : Used for generating and printing sales reports. Settlement (Z) Mode Push the green release lever back up firmly

: Comprehensive guides for hardware testing, maintenance, and motherboard-level repairs can be found on sites like The Checkout Tech .

Navigate the Programming Menu ( 1 for Departments, 3 for Main Groups) to create or edit, then press PRINT to store changes. 4. Label Printing and Formatting

Navigating between "R Mode" (Operation) and "S Mode" (Programming) using specific key combinations. Label Loading: