The dedicated programming software executable.
Enter your licensed operating frequencies here. Ensure the decimal point is accurate.
Look under . If a yellow warning icon appears, download and install the appropriate PL2303 or FTDI driver. Note the allocated COM port number (e.g., COM3). Step 2: Install the Hytera CPS
: Set a limit on continuous transmission duration to prevent channel jamming and battery drain.
You cannot program the radio with a standard micro-USB phone cable. You must use a .
After editing your channels and preferences, click the icon, or go to Program > Write to Radio .
Use these sub-audible tones to block out unwanted interference from other groups sharing the same frequency. Select "None" for open communication.
Once you have finished making all your changes, click the button in the CPS to upload the new configuration to your radio.
Connect the PC26 cable to the accessory jack on the side of the TC-610. Turn on the radio, ensuring the battery is fully charged. 3. Read the Radio Open the software and select the correct COM port.
Hytera Tc 610 Programming Software File
The dedicated programming software executable.
Enter your licensed operating frequencies here. Ensure the decimal point is accurate.
Look under . If a yellow warning icon appears, download and install the appropriate PL2303 or FTDI driver. Note the allocated COM port number (e.g., COM3). Step 2: Install the Hytera CPS
: Set a limit on continuous transmission duration to prevent channel jamming and battery drain.
You cannot program the radio with a standard micro-USB phone cable. You must use a .
After editing your channels and preferences, click the icon, or go to Program > Write to Radio .
Use these sub-audible tones to block out unwanted interference from other groups sharing the same frequency. Select "None" for open communication.
Once you have finished making all your changes, click the button in the CPS to upload the new configuration to your radio.
Connect the PC26 cable to the accessory jack on the side of the TC-610. Turn on the radio, ensuring the battery is fully charged. 3. Read the Radio Open the software and select the correct COM port.
