: Double-clicking the "Set" button accesses the controls for Alarm 1, while a sustained hold on the "Set" button accesses the controls for Alarm 2. Speakerphone and Lighting
Used to set, activate, and deactivate individual alarms.
You can set two separate alarms, making it useful for couples or heavy sleepers.
Short press the button repeatedly until the display shows the radio frequency mode.
Short press to decrease volume. Long press to skip to the previous song. baseus encok e09 manual
: Short-press the light button to toggle the LED ring on/off.
If prompted for a code, enter "0000" to finalize the link. The Digital Clock & Dual Alarms
Use the and Volume - buttons to adjust the correct minutes.
Long press (3) for 2 seconds to go to the previous song or (4) for the next song . : Double-clicking the "Set" button accesses the controls
Pro Tip: Plug in the USB charging cable; it acts as an external antenna to improve signal reception. Ambient Light Control
Press "M" to switch to minutes, and use (+) and (-) to adjust. Wait 5 seconds to lock in the time. Setting the Alarms
against other in its price range?
All functions are controlled by six buttons on the top panel. Short press the button repeatedly until the display
Connect the provided Micro-USB cable to the rear port of the speaker. Plug the other end into a 5V/1A USB wall adapter.
Is your issue related to , the alarm settings , or battery life ?
Setting the clock requires precise button sequences often cited in guides from iG-Store . : Short-press the SET button. The hour will flash. Adjust with "+" and "–". Press SET again to adjust minutes. Press Mode to save. Dual Alarms : Alarm 1 : Double-tap the SET button. Adjust time as above. Alarm 2 : Long-press the SET button.