Http V724install !exclusive! ⇒

| Problem | Solution | |---------|----------| | Port already in use | netstat -tulpn | grep :8443 then kill process or change port | | SSL handshake failure | Verify keystore password and alias: keytool -list -keystore keystore.jks | | 404 after install | Check context root in deploy.xml |

From a remote machine on the same network, open a web browser or use a command-line utility like curl to verify the directory is accessible: curl -I http://Your-Server-IP/v724install/config.xml Use code with caution.

AP Mode is highly recommended by AlarmGrid Guides because it bypasses router incompatibilities often found with automated button pairing. 1. Power On the Hardware Http V724install

: Once the LED is solid green, log in to your provider's app (such as the Brinks Home Mobile App

Open the Wi-Fi settings menu on your smartphone, tablet, or PC. Look for a broadcasted network labeled , where the characters in parentheses represent the final six digits of your camera’s unique MAC address. Select this network. Note: Your device will likely flag this connection with a "Connected without internet" warning. This is normal behavior, as you are linking directly to the camera hardware. 4. Navigate to http://v724install ADT Command – ADC-V724/724X Camera | Problem | Solution | |---------|----------| | Port

to prevent water entry. Otherwise, remove it to route the power cable safely. Support & Guides

wget https://repo.v724dev.net/httpd/http-v724install.tar.gz Power On the Hardware : Once the LED

Malicious scripts often configure themselves to launch the moment your computer boots.

If the connection drops during the configuration process, the camera may have already successfully connected to your home Wi-Fi. Check the camera's LED. If it is solid green, skip to Step 5 (adding the camera to your Alarm.com account). Your setup is complete; the only remaining task is account linking.