Components and Roles
If you need help tailoring this to your network, feel free to share: Your and RouterOS version (v6 or v7)
RouterOS's kernel lacks certain modules (like TProxy) needed for a standard transparent proxy directly from a container. v2ray mikrotik
/container/add remote-image=v2fly/v2fly-core:v5.12.0 interface=veth1 root-dir=/disk1/v2ray
In the neon-drenched corridors of a city where the "Great Firewall" loomed like an invisible mountain, Components and Roles If you need help tailoring
# Mark connection /ip/firewall/mangle/add chain=prerouting dst-address-list=v2ray_targeted_traffic action=mark-connection new-connection-mark=v2ray_conn passthrough=yes src-address=192.168.88.0/24 # Mark routing based on the connection mark /ip/firewall/mangle/add chain=prerouting connection-mark=v2ray_conn action=mark-routing new-routing-mark=to_v2ray passthrough=no Use code with caution. Step 3: Establish the Custom Routing Table and Route
: She set up the Veth interfaces, tagging the traffic. She wrote a specific firewall rule: any device connected to the "Freedom" SSID would have its traffic quietly handed off to the V2Ray container. She wrote a specific firewall rule: any device
The container’s system time is wrong. MikroTik containers don’t sync NTP automatically. Fix:
# 1. Setup Masquerading for the Container Network (NAT) /ip firewall nat add action=masquerade chain=srcnat comment="Containers through NAT" out-interface-list=WAN src-address=172.17.0.0/24
You must decide which traffic goes through V2Ray. You can target specific local source IPs or destination countries.
The Ultimate Guide to Setting Up V2Ray on MikroTik RouterOS (2026 Edition)