Hpe Smart Array S100i Sr Gen10 Driver Windows Server 2022 -

Deploying Windows Server 2022 on HPE ProLiant Gen10 servers often involves using the embedded HPE Smart Array S100i SR Gen10 Software RAID Go to product viewer dialog for this item.

A: Possibly, but not recommended. HPE officially provides a Server 2022-specific driver (same binary sometimes, but validated). Always use the Server 2022 package.

This tool automatically injects the necessary storage drivers, ensuring the Windows installer recognizes your logical drive.

Set to Smart Array SW RAID Support .

: If you are running a multi‑drive RAID 5 or RAID 10 array, you should install the 106.12.6.0 (or later) driver to avoid data consistency issues. HPE has classified this driver as Critical .

Search for your specific server model (e.g., "ProLiant DL360 Gen10").

HPE has released several driver versions for the S100i controller: hpe smart array s100i sr gen10 driver windows server 2022

You must download the official HPE driver from the Hewlett Packard Enterprise Support Center. Because Windows Server 2022 shares a driver architecture with Windows Server 2019, look for drivers explicitly validated for Windows Server 2019/2022. How to Find the Driver: Go to the website.

Here is the step-by-step process:

Before initiating the driver installation, ensure the following requirements are met: Deploying Windows Server 2022 on HPE ProLiant Gen10

The S100i has no dedicated XOR engine. RAID 5 on Windows Server 2022 will consume high CPU. For production workloads, consider migrating to a hardware RAID controller (P408i-a or P816i-a). The driver cannot fix this architectural limitation.

Unlike hardware RAID controllers where the driver abstracts the physical disks into a logical drive, the S100i driver works in tandem with the HPE Smart Storage Administrator (HPE SSA) to present the logical volumes to the OS.

This is the most common scenario for new server setups. The Windows installation media does not natively include the S100i driver, so you must provide it manually. Always use the Server 2022 package