Fanuc 9900 Parameter: List

9927.1 2nd auxiliary function code. 9927.2 3-axis simultaneous control. 9927.3 Additional axis control. 9927.4 Workpiece counter & cncmakers.com

The table below compiles the most commonly referenced FANUC 9000 and 9900 series parameters. It is important to note that the exact function of a parameter can vary by control model and system software version. For example, parameter 9900 itself is often used to define the number of axes, but it can have other functions in different contexts. Always cross-reference with your specific machine documentation or contact your machine tool builder for confirmation.

The cursor will jump directly to the start of the system configuration block. Step 3: Modifying or inputting Hexadecimal/Binary Values fanuc 9900 parameter list

Even with PWE set, FANUC and the MTB use additional locks to protect the 9000-9999 series:

Similar to 9900; often manages specific Fanuc 10/11/15 options. 3. How to Access and View Option Parameters Option parameters are viewed in the Diagnostic Screen tool life management

Unlike common parameters (1000–9000 series), which adjust feedrates, acceleration, or motor gains, the defines what kind of control you have . Changing one wrong digit here can turn a 5-axis machining center into a 3-axis mill—or completely brick the control.

Loss of high-speed machining or multi-axis simultaneous control options. SERVO_SYNCH Servo Synchronous Control Baseline Bits and boot the machine back up.

: They unlock specific CNC functions such as additional memory, high-speed machining, tool life management, and multi-axis control.

Power off the main CNC control enclosure switch, wait 30 seconds for the capacitors to fully drain, and boot the machine back up. Alarm P/S 101 (Please Clear Memory)

FANUC controls block parameter edits by default to prevent accidental modification. Press the mode button on the operator panel. Press the OFFSET/SETTING function key on the CRT/LCD panel. Locate the SETTING (HANDY) page. Move the cursor to PARAMETER WRITE (PWE) . Change the value from 0 to 1 and press the INPUT key.